90 Day Labor Guarantee
Labor Rate: $120.00/hr
$150.00 Advanced Minimum
Please be prepared to load and unload your own equipment safely.
Consumer Mowers up 48 inch deck
Zero Turn may add $50.00 to flat rate for hydraulic service/parts.
INCLUDED:
INCLUDED: Inspect tires, inspect mower deck(check for worn belts, pulleys, sharpen blades), inspect battery and charging system, inspect electrical, inspect steering, change engine oil, replace oil filter, clean/replace air filter elements, replace fuel filter, replace spark plug, condition fuel system (may replace gaskets, fuel lines, carb kit), check engine operating system, check/lubricate cables, check all safety components for proper operation, test run and adjust as necessary.
Any items needed that are not covered such as recoil repair, carburetors, wheels, blades, cables, belts will be provided as an estimate. Fuel will be added to the bill in 1 gallon increments @ posted rate from Pumpkin Center.
Any repair only work will be estimated with a $50-150.00 prepaid minimum upon acceptance of equipment in for repair. Please be prepared to load and unload your own equipment safely.
$150.00 Advanced Minimum
We service many different riding mowers, and all have their own individual standards. All riding mowers are tested when they come in. We attempt to duplicate the complaint or malfunction. Each riding mower is cleaned and inspected for wear or breakage. Required repairs are evaluated and quoted to the customer. Once the estimate has been approved, we reassemble with quoted parts and tested according to manufacturer’s recommendations.
For faster service download, print and complete the
Service and Repair PDF before dropping off your equipment. If you are mailing be sure to include the 50.00 minimum for each tool.
Having a repair shop comes with keeping up with new products, systems, and repair skills. Eugene Power Tool keeps up to date with all certifications so that repairs to your equipment is state of the art and also compliant with current state standards and emissions regulations.
TUNE UP 4-CYCLE EQUIPMENT
We provide a complete tune up of your 4-cycle lawn mower, edger or pressure washer
CHANGE ENGINE OIL
When engine oil becomes used and dirty, it can clog your mower, edger or pressure washer, cause the engine to ‘spit’ and smoke.
REPLACE AIR FILTER ELEMENT
Air to your lawn mower engine is essential for a clean-running lawn equipment. Dust and light debris is a major cause in motor stress.
REPLACE SPARK PLUG
There is nothing more frustrating than pulling out your lawnmower, edger or pressure washer and find it does not start. Installing fresh spark plugs keeps your mower starting on cue.
SHARPEN MOWER BLADES
Sharp blades keeps your lawn looking smartly kept. Dull blades tend to break and pull the grass, which leaves a brown tip on the grass blades.
CONDITION FUEL SYSTEM
May replace gaskets, fuel lines, carb kit, primer bulb.
A clean-running fuel system saves on gas, is better for the environment, and increases the life of your equipment.
CHECK FOR WORN BELTS
We make sure your belts are in working order and will last you through the season.
CHECK ENGINE OPERATING SYSTEM
We make sure all the engine points are running smoothly.
CHECK/LUBRICATE CABLES
Think of your cables as a nervous system. We make sure it is operating smoothly so your mower can get the work done.
CHECK ALL SAFETY COMPONENTS FOR PROPER OPERATION
Your safety is our biggest concern, so we will make sure to return a safe, well-running lawnmower, edger or pressure washer to you.
TEST RUN AND ADJUST AS NECESSARY
Your lawnmower, edger or pressure washer repair would not be complete without a test run. Only when running your equipment can we detect the adjustments required to make your mower, edger or pressure washer work its best.